I2M DataLog Pro

The DataLog Pro is developed on the same electronics as the Chrome Pro 2 with which it also shares most of the software. Designed for those who want the best from their electronics, but without being able to replace the dashboard of their motorcycle. The DataLog Pro has a can bus with acquisition of over 150 fully configurable channels, integrated lambda controller, 7 analog inputs and integrated TPMS receiver. Developed from the experience gained from the collaboration with Yamaha in the WSBK, and with the historic Team Pedercini.

Thanks to the use of the same hardware as the Chrome Pro 2, it is able to read and acquire over 128 Can Bus channels alongside the 30 standard ones, including speed, rpm, external analogue, tire pressures and temperatures, GPS, gears ... Its hardware allows to make the acquisition of the channels completely configurable with a maximum frequency of 500Hz for each channel, thus reaching a total sampling frequency of over 65 kSample / s! The DataLog Pro can be configured via a USB stick but also via a special configuration cable.

The DataLog Pro integrates a 433MHz receiver inside it which allows it to receive the signals of the TPMS sensors by storing up to 4 sensors for each wheel. It is therefore possible to always monitor the pressure of both tires and the temperature of the rim so as to check correct heating with the electric blankets and study the temperature behavior during use. In order to maximize the reception of the TPMS signal, it is possible to remotely control the antenna using the appropriate shielded cable and support.